Specifikation av Reducer
| Reducertyp | Sömlös reducering; Svetsad reducering;Koncentrisk reducering; Excentrisk reducering; |
| Standard | ASME/ANSI B16.9 |
| Storlek | 1/2'' ~ 48''(Sömlös); 16'' ~72''(svetsad); DN15-DN1200 |
| Väggtjocklek | Sch5~Sch160\XXS |
| Tillverkningsprocess | Push, Press, Forge, Cast, etc. |
| Material | Kolstålreducerare, rostfritt stålreducerare, legerat stålreducerare |
| Kolstål | ASTM A234 WPB, WPC; |
| Rostfritt stål | 304/SUS304/UNS S30400/1.4301304L/UNS S30403/1.4306; 304H/UNS S30409/1.4948; 309S/UNS S30908/1.4833 309H/UNS S30909; 310S/UNS S31008/1.4845; 310H/UNS S31009; 316/UNS S31600/1.4401; 316Ti/UNS S31635/1.4571; 316H/UNS S31609/1.4436; 316L/UNS S31603/1.4404; 316LN/UNS S31653; 317/UNS S31700; 317L/UNS S31703/1.4438; 321/UNS S32100/1.4541; 321H/UNS S32109; 347/UNS S34700/1.4550; 347H/UNS S34709/1.4912; 348/UNS S34800; |
| Legerat stål | ASTM A234 WP5/WP9/WP11/WP12/WP22/WP91;ASTM A860 WPHY42/WPHY52/WPHY60/WPHY65; ASTM A420 WPL3/WPL6/WPL9; |
| Duplex stål | ASTM A182 F51/S31803/1.4462;ASTM A182 F53/S2507/S32750/1.4401; ASTM A182 F55/S32760/1.4501/Zeron 100; 2205/F60/S32205; ASTM A182 F44/S31254/254SMO/1.4547; 17-4PH/S17400/1.4542/SUS630/AISI630; F904L/NO8904/1.4539; 725LN/310MoLN/S31050/1.4466 253MA/S30815/1.4835; |
| Nickellegerat stål | Legering 200/Nickel 200/NO2200/2.4066/ASTM B366 WPN;Legering 201/Nickel 201/NO2201/2.4068/ASTM B366 WPNL; Legering 400/Monel 400/NO4400/NS111/2.4360/ASTM B366 WPNC; Legering K-500/Monel K-500/NO5500/2.475; Legering 600/Inconel 600/NO6600/NS333/2.4816; Legering 601/Inconel 601/NO6001/2.4851; Legering 625/Inconel 625/NO6625/NS336/2.4856; Legering 718/Inconel 718/NO7718/GH169/GH4169/2.4668; Legering 800/Incoloy 800/NO8800/1,4876; Legering 800H/Incoloy 800H/NO8810/1,4958; Legering 800HT/Incoloy 800HT/NO8811/1.4959; Legering 825/Incoloy 825/NO8825/2.4858/NS142; Legering 925/Incoloy 925/NO9925; Hastelloy C/legering C/NO6003/2.4869/NS333; Legering C-276/Hastelloy C-276/N10276/2.4819; Legering C-4/Hastelloy C-4/NO6455/NS335/2.4610; Legering C-22/Hastelloy C-22/NO6022/2.4602; Legering C-2000/Hastelloy C-2000/NO6200/2,4675; Legering B/Hastelloy B/NS321/N10001; Legering B-2/Hastelloy B-2/N10665/NS322/2.4617; Legering B-3/Hastelloy B-3/N10675/2.4600; Legering X/Hastelloy X/NO6002/2.4665; Legering G-30/Hastelloy G-30/NO6030/2.4603; Legering X-750/Inconel X-750/NO7750/GH145/2.4669; Legering 20/Snickare 20Cb3/NO8020/NS312/2.4660; Legering 31/NO8031/1,4562; Legering 901/NO9901/1,4898; Incoloy 25-6Mo/NO8926/1.4529/Incoloy 926/Alloy 926; Inconel 783/UNS R30783; NAS 254NM/NO8367; Monel 30C Nimonic 80A/Nickellegering 80a/UNS N07080/NA20/2.4631/2.4952 Nimonic 263/NO7263 Nimonic 90/UNS NO7090; Incoloy 907/GH907; Nitronic 60/Legering 218/UNS S21800 |
| Förpackning | Trälådor, pallar, nylonpåsar eller enligt kundernas krav |
| Leveranstid | 7-15 dagar beroende på kvantitet |
| Betalningsvillkor | L/C,T/T |
| Transport | FOB Tianjin/Shanghai, CIF, CFR, etc |
| Ansökan | Petroleum/kraft/kemi/konstruktion/gas/metallurgi/varvsbyggnad etc |
Materialen i armbågar inkluderar gjutjärn, rostfritt stål, legerat stål, formbart gjutjärn, kolstål, icke-järnmetaller och plaster.
Anslutningsmetoderna med rör inkluderar direktsvetsning, flänsanslutning, smältanslutning, elektrisk smältanslutning, gänganslutning och hylsanslutning. Direktsvetsning är den vanligaste svetsmetoden.
Enligt tillverkningsprocessen kan den delas in i: svetsarmbåge, stansarmbåge, tryckarmbåge, gjutarmbåge, stumsvetsarmbåge etc. Andra namn: 90 graders armbåge, rätvinklig armbåge etc.
